Sensors and Modules

Filter
View
Showing 1 - 16 of 135 Items
  • Operating Voltage: 3.6-6 volts
  • Operating Current: < 120 mA
  • Peak Current: < 150 mA
  • Matching Mode: 1:1 and 1:N
  • Character File Size: 256 bytes
  • Diameter: 5 mm
  • Max Voltage: 150 volts
  • Max Power: 100 mW
  • Light resistance(10 lux): 5-10 kohm
  • Dark Resistance: >100 kohm


  • Output Voltage: 3.3V-5V
  • Temperature Range: 0°C to 50°C
  • Humidity Range: 20%-80%
  • Accuracy:±1°C
  • Resolution: 16 bit
  • Supply Voltage: 1.8V to 3.3V
  • High Sensitivity
  • Fast heating
  • Integrated MCU: CCS801
  • I2C Interface
  • Product type: Accelerometer with gyroscope
  • Chip: MPU6050
  • Acceleration range: ±2g, ±4g, ±8g, ±16g
  • Pin counts: 8
  • Supply Voltage: 3.3 V/ 5V.
  • Interface Type: I²C, SPI.
  • Sensing Range: ±2g, ±4g, ±8g, ±16g.
  • Sensitivity: X: 28.6 LSB/g, Y: 31.2 LSB/g, Z: 34.5 LSB/g
  • Ultra Low Power: 40µA in measurement mode, 0.1µA in standby@ 2.5V.
  • Supply Voltage: DC 5 V
  • Current Consumption: 150mA
  • Detecting Concentration: 0.05-10mg/L
  •  Alcohol Dimensions: 32 x 22 x 16 mm
  • Output Voltage: 3.3V-5V
  • Temperature Range: 0°C to 50°C
  • Humidity Range: 20%-80%
  • Accuracy:±1°C
  • Resolution: 16 bit
  • Output Sensitivity: 1.0 ± 0.1 mV / V.
  • Measurement Resolution: 24 bit
  • excitation voltage: 5-10V
  • Operating Voltage: 3-5V DC
  • Optimal Sensing Distance: 2-30 cm
  • Operating Current: 60mA
  • Output Type: Digital (High/Low)
  • Comparator IC: LM393
  • Working voltage: DC 3.3-5 V
  • Op-Amp IC: LM393
  • Induction distance: 0.5M
  • Board PCB Size: 34 x 16 mm
  • Output Type:  Both Analog and Digital
  • Model: PIR HC-SR501
  • Working Voltage:  DC 4.5V- 20V
  • Average Current Consumption (mA): 60 mA
  • Detection Distance: 3-7 m
  • Detection Angle: <140°
  • Power Supply: 3.3-5V DC
  • Easy to use with Arduino without the need of any soldering
  • It combines a simple optical heart rate sensor with amplification and noise cancellation.