IoT and Wireless
- Bluetooth 3.0 with audio decoding feature
- Input Voltage: 3-5V DC
- Audio Out: L out, R out, GND
- Size: 22x13x3mm
- Single Channel RF receiver module
- RF Transmitter remote
- Power rating for Load: 800W
- Receiver sensitivity: >97 dBm
- Size: 35x30x16.6mm
- WiFi Module: ESP8266
- Power Input Voltage: 4.5 - 9 volts
- Communication Interface Voltage: 3.3 volts
- Flash Memory: 4 MB
- USB-Serial: CP2102
- Product Module: RX480-E4
- Working Voltage: DC3.3~5V
- Quiescent Current: ≤5mA
- Working Frequency: 433 MHz (Others can be customized )
- Receive Sensitivity: -108 dB
- Input Voltage: 3.3V-6V DC
- Frequency: 2.4GHz ISM Band
- Emission Power: 4dBm, Class 2
- Modulation: Gaussian Frequency Shift Keying
- Sensitivity: -84dBm @ 0.1% BER
Transmitter
Operating voltage 3.5-12 V
Communication Distance 20-200 meter
Transfer rate 4 KB/sec
Receiver
Operating voltage 5V DC
Typical Sensitivity 105 dB
- Supply Voltage: 3.7-4.4 volts
- Quad-Band: 850/950/1800/1900 MHz
- Logic Level: 3-5 volts
- Sleep Mode current consumption: 1 mA
- Peak Current: 2 A
- Flash Memory: 1 MB
- Wake up and transmit packets: < 2 ms
- Standby power consumption: 1.0 mW
- Wireless Standards: 802.11 b/g/n
- Frequency Range: 2.4 GHz-2.5 GHz (2400 M-2483.5 M)
- Supply Voltage: 5V
- SPI Flash: Default 32 Mbit
- RAM: 520KB SRAM + 4MB PSRAM
- Bluetooth 4.2 BR/EDR and BLE standards
- WiFi: 802.11 b/g/n
- Device: ESP8266-12
- Frequency Range: 2.4 GHz-2.5 GHz( 2400 M-2483)
- Operating Voltage: 3.0-3.6 V
- Operating Current: 80 mA
- Wireless Standards: 802.11 b/g/n
- Operating voltage supply: 2.7 V - 3.6 V
- Average operating current: 80 mA
- Sensor type: Hall sensor
- Bluetooth: v4.2 BR/EDR and BLE
- No. of Pins: 30
- Frequency: 315 MHz
- Receiver sensitivity: -98 dBm
- Transmission Distance: 3-5m
- Receiver Operating Voltage: DC 5V
- Transmitter Operating Current: 10mA at 12V
- Frequency: 433 MHz
- Four Channel
- Remote Control Range: 100 meter
- Battery: 27A 12V (included)
- Size: 55x29.5x14mm
- WiFi Module: ESP8266
- Power Input Voltage: 4.5 - 9 volts
- Communication Interface Voltage: 3.3 volts
- Flash Memory: 4 MB
- USB-Serial: CH340 G
- Frequency: 433MHz
- Coding Chip: EV1527
- Remote control Range: 120-150 meter
- Power Supply: 12V (Battery included)
- Size: 67x15x16
- Operating voltage supply: 2.7 V - 3.6 V
- Average operating current: 80 mA
- Sensor type: Hall sensor
- Bluetooth: v4.2 BR/EDR and BLE
- No. of Pins: 38
