Robotics Components and Motors

Filter
View
Showing 1 - 16 of 110 Items
  • Material: Plastic
  • Operating Voltage: 3.6-6 V DC
  • Coil Resistance: 9Ω± 5% (at 20 Celsius)
  • Pulse Width: 30ms
  • Pipe Size: 1/2 Inch
  • Operating Voltage:  3 ~ 6V
  • Operating Current: 130 ~ 220mA
  • Flow Rate: 80 ~ 120 L/H
  • Maximum Lift: 40 ~ 110 mm
  • Operating voltage:  12 Volt
  • No Load Current: 0.6A
  • Maximum Current: 2A
  • No Load Speed: 4000 - 5000 rpm
₹ 199.00
Add to cart
Quick View
  • Operating voltage: 3.0v~7.2V
  • Torque: 2.5kg/cm
  • Operating speed:  0.1s/60°
  • Torsional moment: 1.5 kg/cm
  • Rotation: 0°-180°
₹ 115.00
Add to cart
Quick View
  • Rated Voltage: 3V - 12V
  • Shaft Diameter: 2mm
  • Shaft Length: 11mm 
  • Type: Brushed DC Motor
  • Motor Speed: 4000-16000 RPM
₹ 22.00
Add to cart
Quick View
  • Operating Voltage: 6-12V DC
  • No-Load Current: 0.7A
  • No-Load Speed: 18000rpm
  • Shaft Length: 5mm
  • Operating Voltage: 12V DC
  • Operating Current: 1.5A
  • Motor power: 1hp
  • Flow Rate: 300 L/min
  • Total Head: 1 Meter
  • Operating Voltage:  7 volt~14 volt
  • Nominal Voltage: 12 Volt
  • No Load Current: 0.2A
  • Maximum Current: 1.2 A
  • No Load Speed: 5000 RPM
₹ 125.00
Add to cart
Quick View
  • Voltage: 3 to 6 Volts
  • Shaft Diameter: 2mm
  • Shaft Length: 8mm
  • Type: Brushed DC Motor
  • Motor Speed: 10,000 RPM-25,000 RPM
₹ 14.00
Add to cart
Quick View
  • Diameter: 10mm 
  • Width: 2.8mm
  • Rated voltage: 1V to 4.2V
  • Current: 66 mA
  • Output Speed: 12000RPM
₹ 15.00
Add to cart
Quick View
  • Torque: 2.5 kg-cm
  • Current/Phase: 1.5A 
  • Operating Voltage (VDC): 12 ~ 24 VDC 
  • Step Angle: 1. 8°/step
  • Shaft Type: Round
  • Motor Voltage (VCC2): 4.5 V to 36 V
  • Maximum peak motor current: 1.2 A
  • Maximum continuous motor current: 600 mA
  • Supply voltage to VCC1: 4.5 V to 7 V
  • Transition time: 300 nS
₹ 30.00
Add to cart
Quick View
  • Model: R365
  • Voltage Rating: 6-12V DC
  • No Load Current: 0.23A
  • Maximum Flow: 2-3 liters / minute
  • Maximum pressure at the outlet: 1-2.5 kg
  • Logic Voltage: 4.5-7 volts
  • Motor Drive Voltage: 5-40 volts (Lower value Depends on ViH)
  • Total DC current: 4 A
  • Number of channels: 2
  • Over current and Thermal Protection
  • Operating Voltage:  3-12 V DC
  • No Load Current:  40-180 mA
  • Rated Torque:  0.35 Kgcm
  • Rated Speed(After Reduction): 150 RPM