HatchnHack Products
- 12 Channel 10 bit ADC
- 2 x 16 Bit Timers
- Ultra low power
- Power on reset
- Brown-out detection
- UPDI
- Operating Voltage 1.8-5.5V
- Operating Frequency 20MHz (Max)
- Number of Channels: 4
- Number of Pins: 6
- Voltage on Lx Side: 1.8V-5V
- Voltage on Hx Side: 2.8V-6V
- Power: 2.8V-6V
₹ 19.00
- The Typical operating voltage of NE555 IC is +5V can withstand up to +18V.
- The source/sink current of the output pin is 200mA
- Consumes up to 3mA when operating at +5V
- Trigger Voltage is 1.67 when operating at +5V
- The operating Temperature is 70°C
₹ 209.00
₹ 799.00
- VBUS: 5V Power Supply
- D- : USB D- Signal
- D+: USB D+ Signal
- ID: USB Identifier Signal for OTG Devices
- GND: Power Ground
₹ 169.00
₹ 109.00
- Arduino nano with Cable
- Input Devices: 4x4 Keypad, LDR, Temp. & Humidity Sensor, push button, Potentiometer
- Output Devices: Red, Green, Blue LEDs, 16x2 LCD, buzzer
- Communication: Bluetooth Module
- Soldered PCB with onboard slots
- Onboard slot for Arduino nano
- Input Devices: 4x4 Keypad, LDR, Temp. & Humidity Sensor, push button Potentiometer
- Output Devices: Red, Green, Blue LEDs, buzzer
- Onboard slot for Bluetooth Module
- Onboard slot for 4x4 Keypad Matrix
- Soldered PCB with onboard slots
- Arduino nano with Cable
- Input Devices: 4x4 Keypad, LDR, Temp. & Humidity Sensor, push button, Potentiometer
- Output Devices: Red, Green, Blue LEDs, 16x2 LCD, buzzer
- Communication: Bluetooth Module
- Unsoldered PCB with onboard slots
