Motor Driver
- Motor Voltage (VCC2): 4.5 V to 36 V
- Maximum peak motor current: 1.2 A
- Maximum continuous motor current: 600 mA
- Supply voltage to VCC1: 4.5 V to 7 V
- Transition time: 300 nS
- Logic Voltage: 4.5-7 volts
- Motor Drive Voltage: 5-40 volts (Lower value Depends on ViH)
- Total DC current: 4 A
- Number of channels: 2
- Over current and Thermal Protection
- Voltage Range: 8-35V
- Continuous Current per Phase: 1 Amp
- Maximum Current per Phase: 2 Amp
- Microstep resolutions: Full, 1/2, 1/4, 1/8, and 1/16
- 2 connections for 5V servos connected to the Arduino’s high-resolution dedicated time.
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak).
- Protection: Thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection.
- Type: CCPM Servo Tester, ESC or Servo tester
- Output: 15mA (5.0)
- Operating Voltage(VDC): 4.8 to 6
- Output Signal: 1.5ms±0.5ms
- Color: Blue
- Operating Voltage(VDC): 4.5 to 12 V
- Max current: 600 mA per rotor
- Two Motor Interface
- Package: 16 Pin DIP
- Output Current: 500mA
- Frequency: 430 kHz
- Output Voltage: 5.1V
- Input Supply Voltage: 8-35V
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Input Supply Voltage: 8.2 ~ 42V DC
- Current Handling Capacity: 2.2A
- Continuous Current: 1.5A (per phase)
- Logic Input: 2.5 ~ 5V
- Application: 3D Printer, CNC machine, Laser Engraver
- Input Supply Voltage: 12V-40V DC
- Max. Output Power: 400W
- Max. Continuous Output Current: 8A
- PWM Frequency: 13kHz
- Duty Cycle: 10%-100%
- Supply Voltage: 9-42V DC
- Supply Current: 0-5A
- Output Current: 0.5 to 4.0A
- Max. Power Output: 160W
- Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
