Motors
- Operating Voltage: DC 12V
- Speed: 100rpm
- Shaft Length: 6mm
- Torque: ≤ 3.5 kg-cm
- Attached plastic spur gear box
- Voltage: 5V DC
- Step Angle: 5.625° /64
- Frequency: 100Hz
- Self-positioning Torque: >34.3mN.m
- Friction torque: 600-1200 gf.cm
- Output Voltage: DC 12-36 V
- Speed: 3600 RPM @12V, 7600 RPM @24 V
- Current: 0.08 A ( Stall 2.8 A)
- Voltage: 12 V-24 V
- Motor Diameter: 30 mm
- Operating Voltage: DC 12V
- Speed: 300rpm
- Torque: 2kg-cm
- Shaft length: 6mm
- Attached plastic spur gear box
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Model: 23HS5628
- Rated Current: 2.8A
- Rated Voltage: 3.2V
- Holding Torque: 189 N-cm/18.9kg-cm
- Step Angle: 1.8°
- Model: 17HS4401
- Rated Current: 1.7A
- Rated Voltage: 3.2V
- Holding Torque: 40N.cm
- Step Angle: 1.8°
- Rated Voltage: DC 12V
- No-Load Current: 0.2-0.24A
- Rated Power: 5W
- No-Load Speed: 60RPM
- Input Voltage Range: DC 5V-12V
- Voltage Rated: 3.7V
- Current Rated: 40mA
- Speed: 16000rpm
- Torque: 2gcm
- Shaft Dimension: 6.5mmx1mm
- Operating Voltage: 12V DC
- Flow Rate: 40ml/min
- Noise Level: <65dB
- Operating Temperature: 0°C~40°C
- Rated Voltage: 6V DC
- Rated Current: 300mA
- Relative Humidity: < 80%
- Flow Rate: 0-100mL/min
- Pump Tube Diameter: 5mm
- Operating Voltage: 7 volt~14 volt
- Nominal Voltage: 12 Volt
- No Load Current: 0.2A
- Maximum Current: 1.2 A
- No Load Speed: 5000 RPM
- Logic Voltage: 4.5-7 volts
- Motor Drive Voltage: 5-40 volts (Lower value Depends on ViH)
- Total DC current: 4 A
- Number of channels: 2
- Over current and Thermal Protection
- Operating Voltage Range: DC 3V-12V
- No Load Current: 50mA
- Speed: 36-108rpm
- Shaft Diameter: 4mm
- Shaft Length: 4.6mm
- Rated Voltage: 3.6V
- Rated Current: >1A
- Motor Diameter: 27.5mm
- Shaft Diameter: 2.3mm
- Shaft Length: 11.7mm
