The ESP Prog is an ESP32 Programmer board. It can be used in multiple ways, like using it for programming ESP8266, ESP32, or any other microcontroller that needs a boot pin and reset pin control for flashing the program. Or, one can also use it as a USB to UART adapter.
- USB-C Type Interface: A USB can be connected in any direction. Use a USB-A to USB-C cable.
- LEDs for Power, RX, TX
- Switch for Reset and Boot
- Both 3.3V and 5V are available on the O/P connector
- All signals on a standard 2.54mm Pitch Header (Header will come along with the board (unsoldered))
|ESP Prog V1.1
|ESP32 Programmer Board