1 Channel 5V Relay Module
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great

1 Channel 5V Relay Module

In Stock - SKU: 5B17

53.00
[ ₹ 44.92 + ₹ 8.08 (18% GST) ]
  • Single Channel
  • Relay Coil Voltage: 5V DC
  • One normally closed Contact one normally open contact
  • High Impedance controller pin
  • Max AC Voltage 250V
Image
  • Order within

1 Channel 5V Relay module is used as a switching device and as it is a single channel this module can control only a single circuit. Relay modules with multiple channels can control multiple circuits.

This module consists of 6 input-output pins i.e., Vcc, GND, IN, Common (COM), Normally Closed (NC) and Normally Open (NO). Vcc and GND are the two ends of the coil inside the relay. These pins are used to trigger ON/OFF the relay. Vcc is connected to 5V DC and GND is connected to the ground. At Input pin, we give a signal from a microcontroller to allow/disallow current to flow through the coil. Common is connected to one end of the device to be controlled. The other end of the load is either connected to the NC or NO. If the load is connected to NC then the device remains connected before trigger and if it is connected to NO then the device remains disconnected before trigger. The trigger voltage of this module is 5 V.

Devices operating on 10A, 250V AC and 10A 30V DC can be used as load devices for this module. When the trigger voltage is supplied the coil is turned ON and then the contact between common to NC is changed to common to NO. and when trigger voltage is not supplied to the relay the contact comes back to common to NC from common to NO.

1 Channel 5V Relay module is used as a switching device and as it is a single channel this module can control only a single circuit. Relay modules with multiple channels can control multiple circuits.

This module consists of 6 input-output pins i.e., Vcc, GND, IN, Common (COM), Normally Closed (NC) and Normally Open (NO). Vcc and GND are the two ends of the coil inside the relay. These pins are used to trigger ON/OFF the relay. Vcc is connected to 5V DC and GND is connected to the ground. At Input pin, we give a signal from a microcontroller to allow/disallow current to flow through the coil. Common is connected to one end of the device to be controlled. The other end of the load is either connected to the NC or NO. If the load is connected to NC then the device remains connected before trigger and if it is connected to NO then the device remains disconnected before trigger. The trigger voltage of this module is 5 V.

Devices operating on 10A, 250V AC and 10A 30V DC can be used as load devices for this module. When the trigger voltage is supplied the coil is turned ON and then the contact between common to NC is changed to common to NO. and when trigger voltage is not supplied to the relay the contact comes back to common to NC from common to NO.

Operating Voltage  5V DC
Maximum Current 20 mA
Maximum Current 10A @250VAC, 10A @125VAC
Dimensions(LxBxH) 44x77x20 (mm)

SHIPPING

  • We at HatchnHack, believe that you as our customer have ordered the items with enthusiasm and an urgent requirement.
  • We try to ship all orders received by 11 AM Indian Standard Time, within 24 hours from the time of order. For order received on Saturdays and Sundays, the effort is to get them dispatched by Monday.
  • For ensuring fastest possible delivery time (i.e. the time in which the order reaches your doorstep), we ship your order only through trustworthy and highly reputable courier services.
  • We may at a few times be limited by technical and stock issues (based on product specification or ready availability), and have to fulfill your order partially. In such rare scenarios, we shall inform you of the same before dispatching the order.
  • Rarely, we may have some operational instances, where we require more than 2 days to dispatch the order. In such a scenario, the customer has the right to request for a complete refund.
  • We have the right to process custom orders, and orders provided with bulk discounts in a minimum of 2 working days. The customer may request cancellation of the order, but the decision to refund would depend on factors such as if the materials are already procured or the standing of customer with the company.
  • In case you think that the condition of the parcel is not proper, or have any doubts regarding it being tampered with or damaged, kindly contact us through the support channel, on - 8810424663, or through e-mail at 'Sales@HatchnHack.com'.
  • For tracking the shipment status of your order, you may either use the 'Track your Order' section of our website, or click on the mail confirmation you received from us with the Tracking Information.
  • All packages shall be shipped with an invoice included, mentioning the price as regulated by the Indian Tax Regulations.

RETURNS POLICY

  • Our policy lasts 15 days. If 15 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
  • To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
  • Several types of goods are exempt from being returned.
  • Additional non-returnable items: Gift cards and Downloadable software products
  • To complete your return, we require a receipt or proof of purchase.
  • Please do not send your purchase back to the manufacturer.
  • There are certain situations where only partial refunds are granted (if applicable)
    • Any item not in its original condition, is damaged or missing parts for reasons not due to our error
    • Any item that is returned more than 15 days after delivery

Customer Reviews

Based on 7 reviews Write a review