PIC16F676 14-Pin FLASH-Based 8-Bit CMOS Microcontrollers
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great

PIC16F676 14-Pin FLASH-Based 8-Bit CMOS Microcontrollers

In Stock - SKU: 2K13

82.00
[ ₹ 69.49 + ₹ 12.51 (18% GST) ]
  • Total pins: 14
  • Programmable pins: 12
  • Programmable code protection
  • Wide operating voltage range (2.0V-5.5V)
  • Maximum current to any I/O pin: IN: 25mA OUT: 25mA
Image
  • Order within

PIC16F676 is a MICROCHIP TECHNOLOGY microcontroller from the 'PIC16F' series. It is an 8-Bit CMOS Microcontroller that is widely used by hobbyists and engineers owing to its functionality, low cost, and tiny size.

Because of its rapid flash memory rewrite cycle, the PIC16F676 is an excellent microcontroller for learning and experimentation for engineers. The controller features 2KBytes of flash memory, which is sufficient for beginners to create simple applications. Furthermore, the 12 GPIO are intended to handle 20mA current (LED driving capacity), allowing beginners to connect the peripheral with less care.

The PIC16F676 has minimal functionality and cannot be utilized to create complex applications. It is used for building simple applications (such as display drivers) as well as programs by beginners who wish to get started with the microcontroller platform.

 

Pin configuration

Pin Function Description
1 VDD Positive Power Supply
2 RA5/T1CKI/OSC1/CLKIN RA5: Pin5 of  Port AT1CKI: Timer1 external clock inputOSC1:Oscillator pin 1CLKI: External clock source input
3 RA4/T1G/OSC2/AN3/CLKOUT RA4: Pin4 of  Port AT1G: Timer1 gateOSC2: Oscillator pin 2AN3: Analog input 3CLKO: Clock source output
4 RA3/MCLR/VPP RA3: Pin3 of  Port AMCLR: Master Clear Input or Reset pinVPP: Programming voltage
5 RC5 RC5: Pin5 of  Port C
6 RC4 RC4: Pin4 of  Port C
7 RC3/AN7 RC3: Pin3 of  Port CAN7: Analog input 7
8 RC2/AN6 RC2: Pin of  Port C2AN6: Analog input6
9 RC1/AN5 RC1: Pin of  Port C1AN5: Analog input5
10 RC0/AN4 RC0: Pin of  Port C0AN4: Analog input4
11 RA2/AN2/COUT/T0CKI/INT RA2: Pin2 of  Port AAN2: Analog input2COUT: Comparator outputT0CKI: Timer0 clock inputINT: External Interrupt
12 RA1/AN1/CIN-/VREF/ICSPCLK RA1: Pin1 of  Port AAN1: Analog input1CIN-: Comparator inputVREF: External Voltage referenceICSPCLK: Serial Programming Clock
13 RA0/AN0/CIN+/ICSPDAT RA0: Pin0 of  Port AAN0: Analog input0CIN+: Comparator inputICSPDAT: Serial Programming Data I/O
14 VSS Ground


Special Microcontroller Features
  •  Internal and external oscillator options
-Precision Internal 4 MHz oscillator factory calibrated to ±1%
-External Oscillator support for crystals and resonators
-5μs wake-up from SLEEP, 3.0V, typical
  • Power saving SLEEP mode• Wide operating voltage range - 2.0V to 5.5V
  • Industrial and Extended temperature range
  • Low power Power-on Reset (POR)
  • Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
  • Brown-out Detect (BOD)
  • Watchdog Timer (WDT) with independent oscillator for reliable operation
  • Multiplexed MCLR/Input-pin• Interrupt-on-pin change
  • Individual programmable weak pull-ups
  • Programmable code protection
  • High Endurance FLASH/EEPROM Cell
-100,000 write FLASH endurance
-1,000,000 write EEPROM endurance
-FLASH/Data EEPROM Retention: > 40 years

Device 

Flash (words)

SRAM(bytes)

EEPROM(bytes)

I/O

10-bit A/D (ch)

Comparators

Timers Flash 8/16-bit

PIC16F676

1024

64

128

12

8

1

1/1



Specifications
CPU 8-bit
Total number of pins 14
Programmable pins 12
Communication Interface ICSP or In-Circuit Serial Programming Interface (13,14 Pins) [Can be used for programming this controller]
ADC Feature 8 channels of 10-bit resolution
Timer Feature One 8-bit counter, One 16-bit counter
PWM channels Not available
Analog Comparator Available-1
External Oscillator Up to 20MHz
Internal Oscillator 4MHz  Internal R-C Oscillator factory calibrated to ±1%
Program memory / Flash memory 2Kbytes[100000 write/erase cycles]
CPU Speed 1MIPS @ 1MHz
Watchdog Timer  Available and is featured with Independent Oscillator for Reliable Operation
Power Save Modes Available
Operating Voltage 2.0V to 5.5V
Maximum current to any I/O pin IN: 25mAOUT: 25mA
Operating Temperature -40°C to +125°C
Maximum current into VDD pin 250mA

PIC16F676 is a MICROCHIP TECHNOLOGY microcontroller from the 'PIC16F' series. It is an 8-Bit CMOS Microcontroller that is widely used by hobbyists and engineers owing to its functionality, low cost, and tiny size.

Because of its rapid flash memory rewrite cycle, the PIC16F676 is an excellent microcontroller for learning and experimentation for engineers. The controller features 2KBytes of flash memory, which is sufficient for beginners to create simple applications. Furthermore, the 12 GPIO are intended to handle 20mA current (LED driving capacity), allowing beginners to connect the peripheral with less care.

The PIC16F676 has minimal functionality and cannot be utilized to create complex applications. It is used for building simple applications (such as display drivers) as well as programs by beginners who wish to get started with the microcontroller platform.

 

Pin configuration

Pin Function Description
1 VDD Positive Power Supply
2 RA5/T1CKI/OSC1/CLKIN RA5: Pin5 of  Port AT1CKI: Timer1 external clock inputOSC1:Oscillator pin 1CLKI: External clock source input
3 RA4/T1G/OSC2/AN3/CLKOUT RA4: Pin4 of  Port AT1G: Timer1 gateOSC2: Oscillator pin 2AN3: Analog input 3CLKO: Clock source output
4 RA3/MCLR/VPP RA3: Pin3 of  Port AMCLR: Master Clear Input or Reset pinVPP: Programming voltage
5 RC5 RC5: Pin5 of  Port C
6 RC4 RC4: Pin4 of  Port C
7 RC3/AN7 RC3: Pin3 of  Port CAN7: Analog input 7
8 RC2/AN6 RC2: Pin of  Port C2AN6: Analog input6
9 RC1/AN5 RC1: Pin of  Port C1AN5: Analog input5
10 RC0/AN4 RC0: Pin of  Port C0AN4: Analog input4
11 RA2/AN2/COUT/T0CKI/INT RA2: Pin2 of  Port AAN2: Analog input2COUT: Comparator outputT0CKI: Timer0 clock inputINT: External Interrupt
12 RA1/AN1/CIN-/VREF/ICSPCLK RA1: Pin1 of  Port AAN1: Analog input1CIN-: Comparator inputVREF: External Voltage referenceICSPCLK: Serial Programming Clock
13 RA0/AN0/CIN+/ICSPDAT RA0: Pin0 of  Port AAN0: Analog input0CIN+: Comparator inputICSPDAT: Serial Programming Data I/O
14 VSS Ground


Special Microcontroller Features
  •  Internal and external oscillator options
-Precision Internal 4 MHz oscillator factory calibrated to ±1%
-External Oscillator support for crystals and resonators
-5μs wake-up from SLEEP, 3.0V, typical
  • Power saving SLEEP mode• Wide operating voltage range - 2.0V to 5.5V
  • Industrial and Extended temperature range
  • Low power Power-on Reset (POR)
  • Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
  • Brown-out Detect (BOD)
  • Watchdog Timer (WDT) with independent oscillator for reliable operation
  • Multiplexed MCLR/Input-pin• Interrupt-on-pin change
  • Individual programmable weak pull-ups
  • Programmable code protection
  • High Endurance FLASH/EEPROM Cell
-100,000 write FLASH endurance
-1,000,000 write EEPROM endurance
-FLASH/Data EEPROM Retention: > 40 years

Device 

Flash (words)

SRAM(bytes)

EEPROM(bytes)

I/O

10-bit A/D (ch)

Comparators

Timers Flash 8/16-bit

PIC16F676

1024

64

128

12

8

1

1/1



CPU 8-bit
Total number of pins 14
Programmable pins 12
Communication Interface ICSP or In-Circuit Serial Programming Interface (13,14 Pins) [Can be used for programming this controller]
ADC Feature 8 channels of 10-bit resolution
Timer Feature One 8-bit counter, One 16-bit counter
PWM channels Not available
Analog Comparator Available-1
External Oscillator Up to 20MHz
Internal Oscillator 4MHz  Internal R-C Oscillator factory calibrated to ±1%
Program memory / Flash memory 2Kbytes[100000 write/erase cycles]
CPU Speed 1MIPS @ 1MHz
Watchdog Timer  Available and is featured with Independent Oscillator for Reliable Operation
Power Save Modes Available
Operating Voltage 2.0V to 5.5V
Maximum current to any I/O pin IN: 25mAOUT: 25mA
Operating Temperature -40°C to +125°C
Maximum current into VDD pin 250mA

SHIPPING

  • We at HatchnHack, believe that you as our customer have ordered the items with enthusiasm and an urgent requirement.
  • We try to ship all orders received by 12 PM Indian Standard Time, within 24 hours from the time of order. For order received on Saturdays and Sundays, the effort is to get them dispatched by Monday.
  • For ensuring fastest possible delivery time (i.e. the time in which the order reaches your doorstep), we ship your order only through trustworthy and highly reputable courier services.
  • We may at a few times be limited by technical and stock issues (based on product specification or ready availability), and have to fulfill your order partially. In such rare scenarios, we shall inform you of the same before dispatching the order.
  • Rarely, we may have some operational instances, where we require more than 2 days to dispatch the order. In such a scenario, the customer has the right to request for a complete refund.
  • We have the right to process custom orders, and orders provided with bulk discounts in a minimum of 2 working days. The customer may request cancellation of the order, but the decision to refund would depend on factors such as if the materials are already procured or the standing of customer with the company.
  • In case you think that the condition of the parcel is not proper, or have any doubts regarding it being tampered with or damaged, kindly contact us through the support channel, on - 9625453232, or through e-mail at 'Sales@HatchnHack.com'.
  • For tracking the shipment status of your order, you may either use the 'Track your Order' section of our website, or click on the mail confirmation you received from us with the Tracking Information.
  • All packages shall be shipped with an invoice included, mentioning the price as regulated by the Indian Tax Regulations.
  • We use Shiprocket as our fulfilment partner and cover 29,000+ Pin Codes.
    Expected delivery timeline is a sum of dispatch time and time taken in the courier process.
    • Slow Dispatch & Delivery
      Free for orders above ₹2000
      Suppose there's a requirement that's not urgent and doesn't hamper your development timelines. In that case, you can use this economical shipping option to save on the costs of shipping. Kindly keep in mind that orders with this shipping option will be dispatched based on convenience.
      Avg. Time To Door Step ~3-7 Days*
    • Standard Dispatch & Delivery
      Rs. 60 including GST
      In Standard Dispatch and Delivery, we will send the package via surface or air, depending upon the location and package contents. We use reputed couriers such as BlueDart, Delhivery, EKart, and XpressBees. We generally dispatch the orders having this shipping option within 1 or 2 business days.
      Avg. Time To Door Step ~2-5 Days*
    • Priority Dispatch & Premium Delivery
      Rs. 80 including GST

      At HatchnHack Cart, we believe you’re the next Tesla. Delivering what you need in the fastest time is why this plan exists!
      This plan is available in around 5000 Pin codes but reduces the time taken in the courier process significantly.
      Avg. Time To Door Step ~1-3 Days


RETURNS POLICY
  • Our policy lasts 15 days. If 15 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
  • To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
  • Several types of goods are exempt from being returned.
  • Additional non-returnable items: Gift cards and Downloadable software products
  • To complete your return, we require a receipt or proof of purchase.
  • Please do not send your purchase back to the manufacturer.
  • There are certain situations where only partial refunds are granted (if applicable)
    • Any item not in its original condition, is damaged or missing parts for reasons not due to our error
    • Any item that is returned more than 15 days after delivery