Motors

Filter
View
Showing 1 - 16 of 21 Items
  • ULN2003A motor driver chip
  • Chip all the pins already leads for easy connection to use
  • 5-12V power supply
  • 4-way signal indicator
  • Step angle: 5.625 x 1 / 64
  • Arduino CNC Shield Version 3.0
  • GRBL  compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
  • Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
  • Compact design.
  • 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
  • Rated voltage: 12V
  • Current:  0.25A
  • Speed: 3500 rpm
  • Airflow: 25.5CFM
  • Noise: 36.7dbA
  • Logic Voltage: 4.5-7 volts
  • Motor Drive Voltage: 5-40 volts (Lower value Depends on ViH)
  • Total DC current: 4 A
  • Number of channels: 2
  • Over current and Thermal Protection
  • Type: CCPM Servo Tester, ESC or Servo tester
  • Output: 15mA (5.0)
  • Operating Voltage(VDC): 4.8 to 6
  • Output Signal: 1.5ms±0.5ms
  • Color: Blue
  • Voltage Range: 8-35V
  • Continuous Current per Phase: 1 Amp
  • Maximum Current per Phase: 2 Amp
  • Microstep resolutions: Full, 1/2, 1/4, 1/8, and 1/16
₹ 89.00
Add to cart
Quick View
  • Rated Voltage: 12V DC
  • Rated Current: 3.4A
  • Size: 140x140x25mm
  • Application: Air exhaust systems, Telecommunication Device Cabinet, etc.
  • Supply Voltage: 9-42V DC
  • Supply Current: 0-5A
  • Output Current: 0.5 to 4.0A
  • Max.  Power Output: 160W
  • Micro Step: 1, 2/A, 2/B, 4, 8, 16,  32
  • Input Supply Voltage: 8.2 ~ 42V DC
  • Current Handling Capacity: 2.2A
  • Continuous Current: 1.5A (per phase)
  • Logic Input2.5 ~ 5V
  • Application: 3D Printer, CNC machine, Laser Engraver


  • Operating Voltage: 12V DC
  • Rated Current: 0.80 A
  • Holding Force: 2.45N
  • Unlocking Time: 1 sec
  • Body Material: Iron
  • Operating Voltage(VDC): 4.5 to 12 V
  • Max current: 600 mA per rotor
  • Two Motor Interface


₹ 89.00
Add to cart
Quick View
₹ 15.00
Add to cart
Quick View
  • 2 connections for 5V servos connected to the Arduino’s high-resolution dedicated time.
  • 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak).
  • Protection: Thermal shutdown protection, internal kickback protection diodes.
  • Can run motors on 4.5VDC to 25VDC.
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection. 
₹ 159.00
Add to cart
Quick View